Y type telescopic filter

Y-type tie rod telescopic filter is a combination of Y-type filter and expansion joint. It is mainly used for water supply and drainage piping in high-rise buildings, multi-story buildings or factories. It is usually installed on pressure reducing valves, Pressure Relief Valve, water level valves or other major equipment. The inlet end is convenient for cleaning debris or installation and disassembly to ensure the normal use of valves or equipment.

Y-type filter is an indispensable filtering device in the pipeline system for conveying fluid media. Y-type filters are usually installed at the Pressure Reducing Valve, pressure Relief Valve, Globe Valve (such as the water inlet end of indoor heating pipeline) or the inlet end of other equipment to remove impurities in the medium to protect the normal operation of valves and equipment. use. The Y-type filter has an advanced structure, low resistance, and convenient sewage discharge.

Installation location: When installing the Y-type filter, a suitable installation location should be selected to facilitate operation and maintenance. Try to install the Y-type filter in a place that is easy to observe and control, and can be easily removed and installed during maintenance.

Flow range: When using a Y-type Universal Valve filter, make sure it is suitable for the actual water flow rate. If the water flow rate exceeds the filter's maximum flow rate, the filter may not be functioning or may cause excessive pressure loss.