For the installation of Gate Valve, the first thing to note is that before installing the Universal Valve, the sealing performance must be tested. If the Universal Valve leaks or the air cushion is damaged, it must be replaced immediately so that everyone can Get the best use out of it.
During the installation process, the first premise is that for all components of the Universal Valve, everyone needs to pay attention to vertical installation. The installation angle should be precise and regular, and tools should be used for corresponding assistance, so that you can Effectively making installation smooth and effective.
Secondly, when installing the Gate Valve, Wuyue Universal Valve also reminds everyone not to apply pressure on the outlet of the Universal Valve. It is best to leave the outlet directly empty, which can allow the Universal Valve to work effectively and help everyone get The best use effect, better use experience, and better installation.
Another thing is that when performing safety measures, please note that it is best for operators to wear corresponding gloves and tools on their hands to prevent oil stains and other problems from getting on the Universal Valve plate. This will affect the sealing effect of the Universal Valve and may also It will consume the service life of the entire Universal Valve and bring the best help to everyone.
Finally, at least two operators must be present during the installation process of the Gate Valve, and they cannot be put into use immediately after the installation is completed. Instead, an effective trial should be conducted first to ensure that the Universal Valve can work normally before being put into use. Go in use.
